Philippines eTravel Pass at Airport: NAIA, Cebu, Clark & All Philippine Terminals

The Philippines eTravel Pass is required at every international airport in the Philippines — including all three NAIA terminals in Manila, Mactan-Cebu, Clark, Davao, Kalibo, Iloilo, and New Bohol. You must register your eTravel pass before boarding your flight and present your eTravel QR code to the immigration officer upon arrival. This guide breaks down exactly what happens at each airport and terminal, so you know what to expect step by step.

eTravel Pass Is Required at All Philippine International Airports

Every traveler arriving in or departing from the Philippines must present an eTravel QR code at the immigration counter. This applies to all 8 international airports — NAIA, Mactan-Cebu, Clark, Davao, Kalibo, Iloilo, and New Bohol — with no exceptions for nationality or travel purpose.

The eTravel system replaced the old paper arrival card in December 2022. Since then, every passenger who arrives at a Philippine international airport must have completed eTravel registration at etravel.gov.ph before landing.

To understand who needs to register for eTravel, the short answer is: almost everyone. Diplomatic passport holders and 9(e) visa holders are the only exceptions.

NAIA (Manila) — eTravel Procedures by Terminal

NAIA has three separate terminals serving different airlines. All three require the same eTravel QR code at immigration, but each terminal has a distinct layout and serves different carriers. Knowing your terminal in advance saves time at Manila's busiest airport.

Ninoy Aquino International Airport (NAIA), managed by the Manila International Airport Authority (MIAA), handles the vast majority of international flights entering and leaving the Philippines. The three international terminals are physically separate — you cannot walk between them — so verify your terminal before you arrive.

Terminal IATA Code Airlines (examples) Notes
NAIA Terminal 1 MNL KLM, Cathay Pacific, Emirates, Etihad, Qatar Airways, Korean Air, ANA, JAL Oldest terminal; separate domestic/international arrivals hall
NAIA Terminal 2 MNL Philippine Airlines (all PAL international) PAL's dedicated hub; connected domestic-international transfer
NAIA Terminal 3 MNL Cebu Pacific International, AirAsia International, Singapore Airlines, China Southern, IndiGo Largest and most modern terminal

NAIA Terminal 1 (MNL-T1)

NAIA Terminal 1 is the oldest of the three and serves most non-Philippine carriers operating to Manila. Upon arrival, the eTravel process follows this sequence:

  1. Disembark and follow signs to "Arrivals / Immigration"
  2. BOQ Health Desk (if applicable): If your eTravel registration generated a red QR code, BOQ officers stationed before the immigration counters will pull you aside for health screening. If you have a green QR code, proceed directly to immigration.
  3. Immigration Counter: Present your passport and your eTravel QR code — either on your phone screen or printed. The Bureau of Immigration officer will scan the QR, verify your data, and stamp your passport.
  4. Baggage Claim → Customs: Collect your luggage and proceed through the Customs Bureau area.
💡 Tip for T1 arrivals: Terminal 1 can have long immigration queues during peak hours (07:00–10:00 and 21:00–01:00). Having your QR code pre-loaded on your phone screen speeds up the process considerably.

NAIA Terminal 2 (MNL-T2) — Philippine Airlines Hub

Terminal 2 is exclusively operated by Philippine Airlines (PAL) and handles all PAL international flights.

  1. PAL ground staff at the boarding gate (in your country of origin) may ask to see your eTravel QR code before you board. Have it ready.
  2. On arrival at T2, follow "Immigration / Arrivals" signage to the immigration hall.
  3. BOQ checkpoint is positioned before immigration lanes. Green QR = proceed directly. Red QR = report to BOQ desk first.
  4. Immigration Counter: Present QR code + passport. BI officer scans and verifies.

Terminal 2 is generally less crowded than T1 or T3 because only PAL operates there. Immigration processing is typically faster.

NAIA Terminal 3 (MNL-T3) — Cebu Pacific, AirAsia Hub

Terminal 3 is the largest and most modern NAIA terminal, handling Cebu Pacific International flights, AirAsia International, Singapore Airlines, China Southern, and IndiGo.

  1. Airline check-in (departure from Philippines): When departing via T3, Cebu Pacific and AirAsia staff at the check-in counter will verify your eTravel departure registration before issuing a boarding pass.
  2. On international arrival at T3, follow immigration signage to the upper-level arrival hall.
  3. BOQ desk is located before immigration lanes — same process as T1/T2.
  4. Immigration Counter: Scan QR + passport stamp.
ℹ️ Airport selection note: When flying into NAIA regardless of terminal, select "Ninoy Aquino International Airport (NAIA)" in your eTravel form — the system does not differentiate between T1, T2, and T3.

Mactan-Cebu International Airport (MCIA / CEB)

Mactan-Cebu International Airport is the Philippines' second-busiest international airport, serving Cebu City and the Visayas region. The eTravel process here is identical to NAIA — present your QR code to the Bureau of Immigration officer upon arrival. No special steps are needed at MCIA.

Located in Lapu-Lapu City on Mactan Island, MCIA (IATA: CEB) operates two terminals:

  • Terminal 1: Older international terminal
  • Terminal 2: Modern international terminal (opened 2018), handling most international traffic

Airlines operating international routes at MCIA include Cebu Pacific, AirAsia, Singapore Airlines, Cathay Pacific, Korean Air, and several Chinese carriers.

eTravel process at MCIA:

  1. At check-in (home country): Show eTravel QR if asked by airline staff
  2. On arrival: Proceed to BOQ health desk (if red QR) → Immigration counter
  3. Select "Mactan Cebu International Airport (MCIA)" during eTravel registration

MCIA's immigration hall is well-staffed during peak arrival periods (early mornings and evenings). Queue times are generally shorter than NAIA.

Clark International Airport (CRK) — Pampanga

Clark International Airport, located in Angeles City, Pampanga (about 80 km north of Manila), serves low-cost carriers from Southeast Asia, China, and the Middle East. All passengers arriving at Clark must present their eTravel QR code at the immigration counter — same procedure as NAIA.

Clark International Airport (IATA: CRK) is operated by Luzon International Premiere Airport Development Corporation (LIPAD). Airlines with routes through Clark include AirAsia Philippines, Cebu Pacific, Scoot, and Wizz Air (charter).

eTravel registration for Clark arrivals: Select "Clark International Airport (CRK)" from the airport dropdown when completing your eTravel form.

💡 Note for Clark arrivals: Passengers arriving at Clark who plan to continue to Manila by road should factor in 1.5–2 hours of travel time to reach the city. The immigration hall at Clark is smaller than NAIA, which usually means faster processing.

Other Philippine International Airports

Four additional airports in the Philippines handle international arrivals and require eTravel: Francisco Bangoy (Davao), Kalibo, Iloilo, and New Bohol (Panglao). The procedure is the same at all of them — present your green eTravel QR code at the immigration counter.

Airport IATA City Key Airlines eTravel Required
Francisco Bangoy International DVO Davao City Cebu Pacific, PAL, AirAsia ✅ Yes
Kalibo International KLO Kalibo (Boracay gateway) Cebu Pacific, PAL ✅ Yes
Iloilo International ILO Cabatuan, Iloilo Cebu Pacific, PAL ✅ Yes
New Bohol (Panglao) International TAG Panglao, Bohol Cebu Pacific ✅ Yes

Francisco Bangoy International Airport (DVO) — Davao City

Francisco Bangoy International Airport serves Davao City in Mindanao, the Philippines' third-largest city. International flights operate mainly from Singapore, Kuala Lumpur, and other domestic hubs. During eTravel registration, select "Francisco Bangoy International Airport (DVO)".

Kalibo International Airport (KLO)

Kalibo International Airport serves as the primary entry point for travelers heading to Boracay Island (a 2-hour bus + boat transfer from the airport). Select "Kalibo International Airport (KLO)" in your eTravel registration. Given the relatively low volume of international flights, immigration queues at Kalibo are typically short.

Iloilo International Airport (ILO)

Iloilo International Airport handles international routes from Singapore and charter services. Select "Iloilo International Airport (ILO)" during eTravel registration.

New Bohol (Panglao) International Airport (TAG)

Opened in 2018, the New Bohol International Airport on Panglao Island handles seasonal international charter flights, primarily from China and South Korea. Select "New Bohol (Panglao) International Airport (TAG)" during eTravel registration.

Where Exactly to Show Your eTravel QR Code at the Airport

Show your eTravel QR code in two places: first to the airline staff at check-in or the gate (before boarding your inbound flight), then to the Bureau of Immigration officer at the arrival counter after landing in the Philippines.

Checkpoint 1: Airline Check-In (Before You Board)

When you check in for a flight to the Philippines, airline staff may verify your eTravel QR code before issuing a boarding pass. This is increasingly common, especially on Philippine Airlines and Cebu Pacific. Have your eTravel QR code ready on your phone screen or printed.

Checkpoint 2: Bureau of Quarantine (BOQ) Desk on Arrival

The first checkpoint after disembarking is the BOQ health desk, located before the immigration lanes.

🟢 Green QR Code

Proceed directly to the immigration counter. No BOQ stop required.

🔴 Red QR Code

Report to BOQ for health inspection. This may take 15–30 minutes. Your health declaration indicated illness, recent travel to high-risk areas, or missing information.

Checkpoint 3: Bureau of Immigration Counter

This is where your eTravel QR is officially scanned. The Bureau of Immigration (BI) officer will:

  1. Ask you to show your eTravel QR code (phone screen or printout)
  2. Scan the QR with a handheld reader
  3. Verify your passport data matches your eTravel registration
  4. Stamp your passport and allow entry

The entire immigration interaction typically takes under 2 minutes with a valid green QR code.

⚠️ Pro tip: Avoid potential delays by double-checking that the name and passport number on your eTravel registration exactly match your passport — even one character difference can cause issues at the BI counter.

What Happens If You Didn't Register Before the Flight

If you arrive at a Philippine airport without an eTravel registration, Bureau of Quarantine (BOQ) staff at the airport can help you register on the spot. Expect a wait of 15–30 minutes. Registration at the airport is possible but not recommended — pre-registering at home avoids the queue entirely.

Philippine Airlines explicitly advises passengers to complete eTravel registration within 72 hours before departure from their home country. If you miss this and arrive unregistered:

  1. BOQ or airport staff will direct you to an assistance area (typically adjacent to the immigration hall)
  2. You complete the eTravel form on a device provided by staff or your own phone
  3. Once your QR code is generated, you proceed to the immigration counter

This process is common enough that airports are equipped for it — but it adds time to your arrival. If you're traveling in a group, one person's missing registration can delay the entire group at immigration.

To avoid this, register your eTravel pass online at etravel.gov.ph up to 72 hours before your scheduled arrival.

FAQ — eTravel Pass at Philippine Airports

Yes. Departing Filipino passengers must also complete eTravel registration. Foreign nationals do not need to register for departure, only for arrival.

Both are accepted. A screenshot on your phone is sufficient. Printing is optional — useful as a backup if your phone battery dies or you lose signal.

All three — Terminal 1, Terminal 2, and Terminal 3. The eTravel process is the same regardless of which NAIA terminal you land at.

No. eTravel is only required for international arrivals and departures. Flights between Philippine cities (Manila to Cebu, Manila to Davao, etc.) do not require eTravel.

Yes, but you'll face delays. BOQ staff at all major Philippine airports can guide you through on-the-spot registration. You'll need to complete the full registration form on your phone or on a device provided by airport staff, and then wait for your QR code to be generated.

The only official website is etravel.gov.ph. Registration is free. Beware of third-party websites that charge fees for eTravel registration — they are not affiliated with the Philippine government. To understand exactly how the official eTravel system works, see our dedicated guide.

Register within 72 hours (3 days) but not earlier. Registrations made more than 72 hours before your scheduled arrival are not accepted by the system. The ideal time is 24–48 hours before your flight.

All Philippine international airports require eTravel for arriving passengers. There are no exceptions based on airport size or location.

Register Your eTravel QR Code Before Your Flight

Don't wait until the airport. Register at etravel.gov.ph within 72 hours before your arrival — free, mandatory, and takes under 10 minutes.

Step-by-Step Guide → Go to etravel.gov.ph ↗

Last updated: March 2026. eTravel requirements are set by the Bureau of Immigration and Bureau of Quarantine.